New Products

930_logo_killark_full.gif (2113 bytes)

Form 7 Gray Iron Conduit Bodies


Duraloy from Hubbell-Killark!

Intermateability
UL Listed and CSA Certified Interchangeability with competitive products.
Enhanced Sealing Capabilities
Neoprene sealing gaskets provide a NEMA 3 Seal.
High Quality Sealing Hardware
316 stainless steel cover screws and washers with neoprene gaskets.
Suitable for wet locations
When used with Form 7 gaskets.
Innovative Spring Clip Design
For installation ease and repeat usage.
Smooth Integral Wire Bushings
Protects cable from damage when wires are pulled through opening.
For Use With Threaded Rigid Conduit
Steel or Aluminum
Ten Standard Hub Configurations Flat-Back Design
For greater wiring capacity and mounting stability.

Technical Points

Zinc/Chromate Comparison

Specification #

Description

Results

ASTM B117 Salt Spray Test – Sample tested for at least 48 hours Zinc with blue chromate – no white or RED corrosion observed at 48 hours
Zinc with chromate sealant – no white or RED corrosion observed at 96 hours

Powder Coating Specifications

Specification #

Description

Results

ASTM D-522 Flexibility (Conical Mandrel) Pass 1/8 inch
ASTM D3350 Adhesion (Cross hatch) Pass (Classification 5B)
ASTM D528 (60 degree) Gloss 65%
ASTM D3363 Pencil Hardness 2H
ASTM D2794 Impact Resistance 160/160 (Direct/Reverse)
ASTM D2247 Humidity Resistance 1000 hours (No blistering or loss of gloss)
ASTM D822 Weatherability 1000 Hours Pass Weatherometer Test

Open-Cell Neoprene Specification

Description

Test Method

Results

Flammability UL 94 Horizontal Listed HBF
Thermal Stability TGA Decomposition Temperature @ 1.1"C/min. Heat Rise 233° C
Compression Set 50% Compression
ASTM D1667 (22 hrs @ 23C) 0.19%
ASTM D3574 (22 hrs @ 70C) 1.3%
ASTM D3574 (after 5 hours autoclave @ 121C) 2.2%
Elongation ASTM D3574 Rate 20 in/min 150%
Autoclave (121C for 5 Hrs) 201%

Top of Page

Last Revised: 03/21/08