LP1 Mini Strobe
2.6"H x 2.33"W x 5"L
This bright yet compact strobe light is ideal for use on control panels, machines, above entryways, on walls and along assembly lines.  It's designed to be flush mounted to flat surfaces with no visible wiring.  Available in 12VDC, 24VDC, 120VAC, and 240VAC models, the rectangular LP1 lens and base are integrated into a single piece with access to the PC board and integrated strobe from the back of the unit.  A polypropylene gasket positioned between the base and mounting surface completes the unit's secure water and dust tight seal.  The strobe tube is replaceable, and is rated for 4,000 hours of life.  The 12/24 volt units are perfect for battery backup systems and vehicular applications.  Low profile requirement or not, the LP1 is an excellent choice for any application requiring a durable, attention-getting surface mount signal..

LP2 Low Profile Light
2.54"H x 2.95" diameter
A unique bullet shaped incandescent light, the LP2 is designed to accommodate both vertical and horizontal panel mount applications.  This unit features a unique lock nut to fasten it firmly in place, and inherent strain relief to further secure all wiring from the rear for added durability.  Available in voltages including 24VAC/DC, 120VAC and 240VAC, each unit includes a readily available, easily replaced standard double-contact bayonet base lamp (type S-6) -6 or 10 watts depending on device voltage.   Engineered for optimum effectiveness and flexibility, this signaling device harmonizes lamp shape and lens design for maximum light output, and functions with most PLC applications including triac outputs.  For low profile applications, the LP2 is an excellent choice for superior performance in the perfect size.

LP3 Low Profile Strobe
5" to 5.7"H x 3.125" diameter
One of the most versatile of the StreamLine™ group of signaling products, the LP3 strobe light is offered in 5 different mounting configurations - including a 1/2" NPT pipe mount, a standard 3-hole surface mount, and a 2-hole design that meets any existing "T-mount" surface or flush mounting requirements you may have.  All LP3 models feature a high quality, long-life strobe lamp and a unique screw-on lens for easy wiring and strobe tube replacements.  Units are available in voltages including 12-48VDC, 120VAC and 240VAC, and all models function in PLC and triac applications.  With their mounting option versatility, process control compatibility, and Federal Signal reliability, the LP3 model strobe lights are sure to meet you most demanding compact signaling needs.

LP4 Mini Sounder
3"H x 3.66" diameter
Compact and versatile, the LP4 is an electronic piezo multi-tone sounder ideal for OEM and general audible alarm applications.  Installation is easier with a unique twist assembly, and multiple looping terminals that eliminate the need for a separate terminal block.  This low voltage 9-28VDC unit offers a choice from 28 switch selectable tone patterns.  A second tone can be produced with simple alternative wiring at installation.  The sounder has a shallow base that allows for flush wiring.   There is also an optional deep base with knockouts available.  And with encapsulated electronics housed in a rugged ABS plastic casing, the LP4 handles punishing environmental applications, indoor or out, with a reliable performance you can count on.

LP5 Micro Sounder
1"H x 3.97" diameter
Our most compact low profile sounder, the LP5 is an economical two-wire micro device perfect for indoor applications.  This unit operates on 9-30VDC power and is designed to produce one of four different tones - "Continuous", "Two-Tone", "Pulsed" and "Sweeping".  The tone is selected by wiring leads to a 2.5mm screw block.  Each tone can function at a high or low dB level, depending on dip switch selection.  The ABS plastic cover, fabricated to NEMA 1 and IP42 specifications, can be easily removed by hand for access to the wiring terminal and dip switches.  Simple but sturdy design and construction, PLC and low voltage control compatibility, and a slim profile all combine to make the LP5 the top choice for a wide range of audible signal application.

LP6 Mini Strobe
3-5/8"H x 5" diameter
At only 3-5/8" high, this compact, high power device is perfect for forklift applications where vertical clearance is a critical consideration.  It can also be easily surface mounted to small control panels.  The LP6 features a powerful flash tube and a unique screw-on dome lens for easy relamping and service.  Its 2 joule power supply works in multiple voltages, from 12-48VDC, without any modification or adjustment.  The LP6 is another top choice for a reliable, economical signaling device that doesn't sacrifice power for price or size.

LP7 Sounder/Strobe
3.5"H x 3.125" diameter
Where both audible and visual signaling with a low profile unit is required, the LP7 is the ideal device.  This sounder/strobe combines the sounder with a fully integrated xenon strobe circuit.  The result is an attractive unit suited to applications both indoor and out, and especially in areas with high ambient noise levels.   The LP7 has 2  tone patterns, two of which are preset, and the others accessed via dip switch.  The bright xenon strobe light operates with any tone selected, producing 0.7 joules of flash energy at a rate of 60 flashes per minute.   Crafted with Federal Signal quality design and construction, the rugged LP7 is equipped to deliver assured performance in the most demanding applications.